Hydraulic hoses & fittings
Hydraulic Hoses Dubai
Inflex is one of the largest providers of Hydraulic hoses, customized hydraulic hose assemblies and end fittings to cater to your every need. Our Hoses can be purchased in various stock lengths or cut to your desired specification.
(Updated on 20/10/2019)
Click here for Stainless Steel Hoses
Hydraulic Hoses and Hose Assemblies
Hydraulic Hoses in Dubai, are available in single wired, double wire or as a multi spiral, from 1/8” to 2” alongwith large stocks of fittings. Our experienced Hose specialists can build your hose assembly as per the desired specifications on time, on budget and on quality. We also hold huge stocks of fittings and adaptors and can even manufacture a specialized adaptor at our well equipped factory. Check out Hydraulic Hoses Dubai.
Find out about our accessories range over here…
Hydraulic Fittings
Our range of hydraulic fittings includes single spiral, double spiral and multispiral ferrule and BSP, JIC , ORFS, Metric (DKOL, DKOS) fittings in standard sizes. Also available is SAE Flanges -3000 & 6000 psi and also Caterpillar flanges. We also stock all kinds of adaptors, re-eusable fittings, Hose Clamps, Steel Spring Guard, Quick Release Couplings, Ball Valves and Non Return Valves. We also stock Stainless Steel fittings and ferrules in sizes of 1/4″ to 2” in different threads.
More about hydraulic hoses, tubes and pipes
Hydraulic tubes are seamless steel precision pipes, specially manufactured for hydraulics. The tubes have standard sizes for different pressure ranges, with standard diameters up to 100 mm. The tubes are supplied by manufacturers in lengths of 6 metres, cleaned, oiled and plugged. The tubes are interconnected by different types of flanges (especially for the larger sizes and pressures), welding cones/nipples with oring seals, several types of flare connection and by cut-rings. In larger sizes, hydraulic pipes are used. Direct joining of tubes by welding is not acceptable since the interior cannot be inspected.
Looking for Stainless Steel Bellows, Click here.
Hydraulic pipe is used in case standard hydraulic tubes are not available. Generally these are used for low pressure. They can be connected by threaded connections, but usually by welds. Because of the larger diameters the pipe can usually be inspected internally after welding. Black pipe is non-galvanized and suitable for welding.
We have specialised Industrial hoses to offer, Click here for Industrial hoses.
Hydraulic hose is graded by pressure, temperature and fluid compatibility. Hoses are used when pipes or tubes cannot be used, usually to provide flexibility for machine operation or maintenance. The hose is built up with rubber and steel layers. A rubber interior is surrounded by multiple layers of woven wire and rubber. The exterior is designed for abrasion resistance. The bend radius of hydraulic hose is carefully designed into the machine, since hose failures can be deadly, and violating the hoses’ minimum bend radius will cause failure Hydraulic hoses generally have steel fittings swaged on the ends. The weakest part of the high pressure hose is the connection of the hose to the fitting. Another disadvantage of hoses is the shorter life of rubber which requires replacement, usually at five to seven year intervals.
Click here for a popular article on Wiki about Hydraulic Hoses.
Tubes and pipes for hydraulic applications are internally oiled before the system is commissioned. Usually steel piping is painted outside. Where flare and other couplings are used, the paint is removed under the nut, and is a location where corrosion can begin. For this reason in marine applications most piping is stainless steel.
Call us on +971-4-3394677 /+971-50-6532580 or +971-50-4501941
or send us mail here…
